Copyright (C) 2002 Tinyard Enterprise Co., Ltd.
All rights reserved.
QF-600L Pneumatic sealer
   
Introduction
QF-600L pneumatic sealer is suitable for sealing various plastic film bags with the thickness of single layer film no more than 0.3mm, width no more than 600mm and weight no more than 50kg. This machine adopts the compressed air as driving power, which need the external connection. Selecting the suitable sealing voltage and heating time according to the different materials and thickness. It can be easily operated by hand pressing or foot stamping, can be independently operated or assembled in the production flow line.
 
Main Featurers  

  • Fit for very large and thick bags' sealing.

  • Driven by the compressed air, it could tightly clamp the bags' band and for sealing. So its sealing result for thick bags is very good.

  • Simple operation

  • The sealing length can be increased to 800mm or 1000mm if needed.

  • It can be used on production flow line and sealing the plastic bags after assembling

 
Working Processes  

  • Adjusting well the height of the working table to fit for bags sizes, and connecting to the air compressor.

  • Putting the packing bags on the working table and smoothly put its band on the sealing bar.

  • Turning on the switch, the compressed air will drive the upper silica gel bar to close and tightly clamp the bag bands.

  • The heating system of the machine will begin to heat the Nichrome bar to melt the bag bands together.

  • After sealing, the upper silica gel bar will automatically open, so a sealing process is finished

 
Technology Parameters  

Voltage

AC220V/50Hz

Hot sealing power

250W

Air compressor

Equipped by user

Height of packing bag

450-750mm

Max sealing loading

50Kg

Pressing head¡¯s adjustable angle

20¡ã

Dimension

720¡Á560¡Á1340

Weight

80Kg
  • The length of the heat-sealing strip comes to 600mm.
  • Height of packing bags is 450-750mm.
  • Max. sealing load is 50kg.
  • The thickness of single layer film should be no more than 0.3mm.
  • This machine needs to work with a air compressor connected.