1.What film shrink tunnel could adopt?

As regards the Shrink Tunnel, our two models can both pack different material's film, such as PP, PE, PVC, POF, PET film. But please note that all these films must be shrinking film, which means the film would shrink being heated. The shrink packaging film is specially made and different from the normal films which expand being heated.

2.Which types do TH series hand pressing sealer have?

As for the Hand Press Sealer and other models, the marking AL means the machine's hull is made of aluminum; the marking ABS means the machine's hull is made of ABS plastic. The machine with aluminum hull is a bit more expensive than that with ABS plastic hull.

3.What's difference between PFS foot sealer and FT facility foot sealer?

As to the Facility Step Sealer and the Foot Sealer (impulse sealer), they are almost same in way of sealing, operation method. Their differences lie in the facility step sealer is a facility type, with simpler structure, cheaper stuffs and lower prices. To be frank with you, because the Facility Step Sealer's rigidity of aluminum pressing bar is not very good, so the sealing quality is not as good as the Foot Stamping Sealer. We sincerely recommend you to adopt the Foot Stamping Sealer.

4.How is our SK-3 strapping machine looks like?

Our SK-3 Strapping Machine looks very like SK-2. They have the same shape, structure. The only difference is their height. The height of SK-2 is 500mm, while the height of SK-3 is 325mm.

5.What's the meaning of model "I,II,III" for FR and FRM series sealer?

As for the Continuous Band Sealer and Dry-ink Coding Sealer, the Model I means sealing in horizontal; the Model II means sealing in vertical; the Model III is equal to Model I adding a horse, and also sealing in horizontal.

6.What's the difference between blister packing machine and skin packing machine?

The blister packing machine and skin packing machine can both seal the articles on paper card with a layer of plastic film. Their difference lies in the blister packing machine need a mould with cavities to put the plastic blister in the cavities. Moreover the blister should be made before. While the skin packing machine don't need any moulds and blister. Just putting a layer of skin packing film on the articles and paper card. Being heated, the film would turn soft and fall on the articles, then the pump inside the machine works to absorb the film to tightly cover on the articles and seal on the paper card. So the articles packed in skin film avoid crash with the plastic to make noise and are protected better.

7.Highlight of our FRM-1100

8.What's the difference between different grades of straps?

Return