Tinyard Enterprise Co.,Limited is one of the top level China bottom sealing and cutting machine manufacturers and suppliers, welcome to wholesale bottom sealing and cutting machine from our factory.
GFQ series Bottom Sealing and Cutting Machine (heat sealing & cold cutting)
Features:
1.
This bottom sealing and cutting machine is suitable for making bags
without printing. It could produce two lines of bags once.
2. It
has automatic temperation controller, static electrcity remover, counter
and alarm units. It's suitable for making rubbish bags or fresh-keeping
bags.
3. If replaced its dot blade with flat blade, rewind coil with flat table, this machine could make flat-rim bags and T-shirt bags.
Main Specifications:
Model | GFQ-600 | GFQ-800 | GFQ-1000 | GFQ-1200 |
Max.Width of bag-making(mm) | 550 | 750 | 950 | 1150 |
Max.Length of bag-making(mm) | 950 | 950 | 1200 | 2000 |
Speed of bag-making(pc/min) | 30-120 | 30-100 | 30-100 | 30-80 |
Power of main motor(kw) | 1.1 | 1.1 | 2.2 | 2.2 |
Weight(kg) | 750 | 800 | 900 | 1000 |
Outline?dimension | 3200×1150×1550 | 3200×1350×1650 | 3200×1550×1750 | 3400×1750×1850 |
Heating power (kw) | 2 | 3 | 4 | 4 |
DFR series Bottom Sealing and Cutting Machine (heat sealing & heat cutting)
Features:
--This
machine is suitable for making barrel-type plastiv vest bags of natura
colour and colour printed bound plastic vest bags. It adopts advanced
photo electric eyes tracking which makes the printing pattern position
be accurate without error,the sealing
--synchronize with theheat-cutting without any pulling force and the sealed bottom be firm and beautiful.Equipped with variable frequency speed regulating motor,it has many automatic protection functions such as energy-saving,overload,overvoltage and overcurrent current,etc. And equipped with automaticcounting device,
--it can arbitrarily set the binding quantity and can automatically discharge and reset after the bags are piled to the set quantity.(note: it can produce T-shirt bag with X626 punching machine)
Main Specifications:
Model | DFR-500 | DFR-700 |
Max.Width?of?bag-making(mm) | 480 | 680 |
Max.Length?of?bag?making(mm) | 999 | 999 |
Speed?of?bag-making(pc/min) | 40-120 | 40-120 |
Power?of?motor(kw) | 1.5 | 1.5 |
Heating?Power(kw) | 3 | 4 |
Weight(kg) | 800 | 900 |
Outline?dimension(L×W×H)?mm | 2600×1150×1500 | 2600×1350×1500 |
CY-500 Automatic Bottom Sealing, Cutting and Punching machine (T shirt bag making)
Features:
--This machine is suitable for producing HDPE and LDPE plastic shopping bags.
--It
adopts automatic producing line including servo motor to feed the film,
photoelectric system to control sealing & cutting, punching "U" shape mouth.
--It adopts easy operationed touch screen on control panel.
Main Specifications:
Model | CY-500 |
Seal and cut width | 180-450mm |
Seal and cut length | 400-650mm |
Seal and cut thickness | 0.015-0.04mm |
Output | 80-150pcs/min |
Air pressure | 5kgs/s.cm |
Motor power | 1.5kw |
Dimension | 6500x1200x1600mm |
Weight | 1.4ton |
CY-430x2 Automatic Bottom Sealing, Cutting and Punching machine (T shirt bag making)
Features:
1.Special
design with a view to keeping the punching hold at the suitable place.
It can make the the bottom of the bag well-arranged and orderly in
block.
2.it use the auto-conveyor belt to collect the punching waste for easily to tide up.
Main Specifications:
Model | CY-430x2 |
Max.Width of Bag-making(mm) | 400mm x 2 |
Max. Length of Bag-making(mm) | 650 |
Speed of Bag-making (pcs/min) | 180pcs x 2min |
Single-face Film Thickness(mm) | 0.010-0.025 |
Air Compressor(not included)(HP) | 6 |
Outline dimension(L×W×H) mm | 5400×1850×1550 |
Machine weight(Kg) | 2700 |
RT @collis: Trade growth ideas with other founders. Look for ways to cross promote. Small startups today may be big friends later. (9/10) 2 days ago
Ut volutpat consectetur aliquam. Curabitur auctor in nis ulum ornare. Sed consequat, augue condimentum fermentum gravida, metus elit vehicula dui.
+1800 1234 56789
support@website.com